TM 5-4320-302-14
6-4. ADJUSTMENT OF FUEL INJECTION TIMING (CONT)
Location/Item
Action
Remarks
5.
Governor
a.
Unscrew leaf spring hex bolts from shaft and re-
lever arm
move leaf spring from inside front cover.
and yoke
spring
b.
Remove locking washers from both ends of
governor arm from inside front cover.
c.
Withdraw governor lever arm and yoke spring
from inside front cover.
6.
Stop lever
a.
Remove circlip from stop lever threaded pin
and torsion
from inside front cover.
spring
b.
Withdraw stop lever and torsion spring from
inside front cover.
7.
O-seal
Remove from plunger from inside front cover.
8.
Plunger and
Remove plunger and press out bush from inside
bush
front cover.
6-24
