TM 5-4320-302-14
5-19.
ALTERNATOR (CONT)
Location/Item
Action
Remarks
CAUTION
Equipment damage may occur if acid core solder is
used to solder diodes to columix leads. Use only
ASTM B284-79 rosin core solder.
NOTE
To assemble, it will be necessary to solder the
columix leads to the stems of the positive and
negative rectifier diode assemblies. When soldering
the leads to the diodes, use long nose pliers to
grasp diode stem between the diode and columix
lead to be soldered. This will give better heat
dissipation and protect diode from damage. Match
up the diodes to the columix lead connections to
facilitate reassembly.
39. Rectifier
Match diodes to columix leads and solder using
diodes and
a 25-watt electronics soldering iron and ASTM
columix
B284-79 rosin core solder. Hold long nose pliers
in place until solder hardens.
5-74