TM 5-4320-302-14
4-34.
FUEL SYSTEM LINES AND FITTINGS, FUEL FEED PUMP, AND FUEL FILTER (CONT)
Location/Item
Action
Remarks
INSTALLATION/REPLACEMENT
WARNING
Severe burns, illness, or death may result if personnel fail to handle diesel fuel oil
properly. Observe the following precautions:
· Do not inhale vapor.
· Do not handle fuel near open flame, sparks, or excessive heat.
· Work in a well-ventilated area.
11.
Fuel filter
Fill new fuel filter cartridge 2/3 full with VV-F-800
Install new
diesel fuel oil and coat top ring. Install by rotating
fuel filter.
fuel filter cartridge clockwise and tighten hand
tight.
12.
Fuel feed
a.
Install fuel feed pump with new O-seal.
Install new
pump
O-seal.
b.
Install washers and screws. Tighten screws
securely.
13.
Backleakage
a.
Install.
line
b.
Install long banjo bolt, hose fitting, and three
washers.
c.
Install short banjo bolt and two washers.
14.
Fuel injection
Reinstall and tighten connectors securely.
lines and
connectors
15.
End plate and
Install with hex bolt, washer, and hex nut.
pipe clip
Tighten hex bolt securely.
16.
Fuel filter-
Install with banjo bolts and new washers.
to-fuel injec-
tion pump
line
4-163
