TM 5-4320-302-14
4-33.
CRANKCASE BREATHER (CONT)
Location/Item
Action
Remarks
REPAIR
10.
Breather
Repair minor rust or corrosion in accordance
with MIL-T-704. If blocked, remove debris.
Replace if damaged.
11.
Hose
If damaged, replace.
12.
Hose fastener
Refinish in accordance with MIL-T-704.
and hose strap
INSTALLATION/REPLACEMENT
13.
Hose, hose
Assemble on breather. Tighten hose fastener
fastener, and
snugly but not too tight. Overtightening hose
hose strap
fastener will crimp or damage hose.
14.
Crankcase
Install onto crankcase stud. Make sure O-seal
Install new O-seal
breather,
has been coated with MIL-L-2104 lubricating
and new dowel
valve plate,
oil. Tighten sealing nut on crankcase stud
sleeve.
new O-seal,
securely.
new dowel
sleeve, and
sealing nut
15.
Retaining plate
Install retaining plate with new notched nail.
Install new notched
and notched
Make sure retaining plate is securely fastened
nail.
nail
to crankcase.
4-158
