TM 5-4320-302-14
4-26.
V-BELT GUARD
This task covers:
a.
Removal
c.
Replacement
b.
Inspection
INITIAL SETUP
Tools
Tool kit, general mechanics automotive
NSN 5180-00-177-7033
Materials/Parts
V-belt guard
Equipment
Condition
Para
Condition Description
Engine shut down and cool.
Special Environmental Conditions
Well-ventilated area required.
General Safety Instructions
WARNING
Severe injury may result from contact with rotating
engine parts, V-belts, or fan. Shut off the engine when it
is necessary to inspect, service, or perform maintenance
on any moving parts. Close control panel to prevent
accidental starting while V-belt guard is removed. If
necessary to run engine without V-belt guard, be sure
that area around V-belts is clear of personnel and
tooling.
Location/Item
Action
Remarks
REMOVAL
1.
Rain cap
Loosen clamp and remove rain cap.
2.
Retainer
Remove nut and bolt and remove retainer.
3.
V-belt guard
a.
Remove cap nuts and washers.
b.
Remove bolt and washer from side of
guard.
c.
Slide guard off studs and remove from
engine.
4-132
