TM 5-4320-302-14
4-24.
FUEL TANK ASSEMBLY (CONT)
Location/Item
Action
Remarks
ASSEMBLY
15.
90 degree el-
Install.
bow and bushing
16.
Fuel level
Install.
indicator
17.
Hex head plugs
Install.
18.
Suction tube
Install.
assembly
19.
Strainer and
Engage hook into strainer and install. Be sure
fuel tank cap
fuel tank cap vent is in open position.
assembly
INSTALLATION
20.
Fuel tank as-
a.
Install fuel tank assembly and position fuel
sembly and
tank straps.
fuel tank
b.
Install hex head cap screws, lockwashers, and
straps
hex nuts. Tighten hex nuts securely.
21.
3-way selector
Install 3-way selector valve in accordance with
valve
paragraph 4-23.
22.
Fuel line and
Install in accordance with paragraph 4-22.
fuel line vent
WARNING
Severe burns, illness, or death may result if personnel
fail to handle diesel fuel oil properly. Observe the
following precautions:
Do not inhale vapor.
Do not handle fuel near open flame, sparks, or
excessive heat.
Be certain fuel lines and connections are secure.
Do not overfill fuel tank.
Work in a well-ventilated area.
23.
Fuel tank
Fill with VV-F-800 diesel fuel.
assembly
24.
Fuel system
Bleed fuel system in accordance with paragraph 4-22.
4-127
