TM 5-4320-302-14
4-27.
V-BELTS (CONT)
Location/Item
Action
Remarks
WARNING
Severe injury may result from contact with rotating engine parts, V-belts, or fan. Shut off
the engine when it is necessary to inspect, service, or perform maintenance on any
moving parts. Close control panel to prevent accidental starting while V-belt guard is
removed. If necessary to run engine without V-belt guard, be sure that area around V-
belts is clear of personnel and tooling.
Priming discharge mixture of water and exhaust gases
may cause severe burns or injury. Wear gloves and
safety glasses when priming pump. Stand clear of
venturi during priming.
CAUTION
Prime the centrifugal pump as soon as possible after
engine starts. Rotation of impeller without water in
volute will damage pump components.
5.
Engine
Run engine for 10 minutes prior to replacing
V-belt guard.
6.
V-belts
Check for proper tension after run-in.
4-136
