TM 5-4320-302-14
4-13. BATTERY CABLE ASSEMBLIES AND BATTERIES
This task covers:
a. Removal
c. Installation/Replacement
b. Inspection/Test/Repair
INITIAL SETUP
Tools
Troubleshooting References (Table 4-2)
Shop equipment, automotive maintenance
Malfunction 1, steps 1 and 2
and repair, common no. 1
NSN 4910-00-754-0654
Malfunction 7, step 1
Tool kit, general mechanics automotive
General Safety Instructions
NSN 5180-00-177-7033
Materials/Parts
WARNING
Batteries (2)
Severe burns or blindness may result if bat-
Battery cable assemblies (2)
tery electrolyte comes in contact with skin
or eyes. Rinse skin and eyes thoroughly
Baking soda (Item 3, Appendix E)
with cold water if in contact with electrolyte.
Electrolyte (Item 4, Appendix E)
Do not smoke or use open flame or spark-
producing equipment in the vicinity of
Grease (Item 6, Appendix E)
battery.
Location/Item
Action
Remarks
REMOVAL
WARNING
Severe burns or blindness may result if battery electrolyte
comes in contact with skin or eyes. Rinse skin and eyes
thoroughly with cold water if in contact with electrolyte.
Do not smoke or use open flame or spark-producing equip-
ment in the vicinity of battery.
1. Battery box
a. Remove hex nuts and lockwashers.
cover
4-49
