TM 5-4320-302-14
Table 4-2. Organizational Maintenance Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Remove nut assembly from threaded rod.
Remove and discard primary element.
Remove nut assembly from threaded rod.
Remove and discard secondary element.
Wipe out interior of body assembly with a lint-free cloth.
Install secondary element into body assembly. Aline hole in element
with threaded rod.
Hand tighten nut assembly as necessary to
make a tight, vibration-free installation.
Overtightening will deform the element.
Install nut assembly and hand tighten.
Install primary element over secondary element. Aline hole in element
with threaded rod.
Hand tighten nut assembly as necessary to
make a tight, vibration-free installation.
Overtightening will deform the element.
Install nut assembly and hand tighten.
Install baffle assembly.
Install cup assembly.
Seat cup assembly against body assembly.
4-32
