TM 5-4320-300-14
Table 3-1. Operator/Crew Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
a.
Restart engine and immediately check oil pressure gage for pressure. If no pressure shows after 15
seconds, stop engine. Allow oil to drain into crankcase for a few minutes, then check crankcase oil at
dipstick level.
CAUTION
Do not overfill. Oil may be blown out through
the crankcase breather if crankcase is overfilled.
If level is low, fill crankcase with the correct grade of engine oil at oil filler. If crankcase is full and no oil
pressure shows on gage, notify organizational maintenance.
3-15
