TM 5-4320-300-14
Table 2-2. Operator/Crew Preventive Maintenance Checks and Services - Continued
B -
Before Operation
A -
After Operation
M - Monthly
D -
During Operation
W -
Weekly
INTERVAL
ITEM TO BE INSPECTED
ITEM
IS NOT READY/
NO. B D A W M
PROCEDURE
AVAILABLE IF
14
Gages. Inspect gages for broken glass, inoperative condi-
tion, or other damage. Clean gage faces by wiping
with a damp cloth.
15
Switches. Inspect switches for damage or looseness in
Switches are
mounting. Check wires to switch for broken insula-
loose or
tion, loose connections, or kinks. Check switch for
damaged.
smooth operation.
16
Starting Aid Control Cable.
WARNING
Handle starting aid ether cylinder carefully.
Ether is highly flammable. Do not use near
sparks or open flames. Do not inhale fumes.
Do not actuate starting aid for more than 1
or 2 seconds at a time and more than twice
with engine stopped. Overloading the engine
air box with this highly volatile fluid could
result in an explosion.
Remove engine left side panel. Unfasten hasps and
catch assemblies, then pull side panel up and out to
remove.
2-24
