TM 5-4320-300-14
5-17. COOLING FAN SHAFT BRACKET, SHAFT ASSEMBLY, AND PULLEY (CONT)
Location/Item
Action
Remarks
ASSEMBLY
2.
Fan shaft
To install a new fan shaft assembly use an arbor
assembly and
press. Press fan shaft assembly bearing into
bracket
bracket until outer race of bearing is flush with
back side of fan shaft bracket.
3.
Pulley
Position assembled fan shaft assembly and
bracket, bracket side down, on bed of arbor
press.
CAUTION
Bearing damage will occur if pulley is pushed on against outer race of
bearing. Push pulley on shaft with shaft opposite end on arbor press
table.
Position opposite end of shaft on arbor press
bed. Press pulley on shaft to dimension re-
corded prior to disassembly.
5-69
