INSPECT/REPAIR - TM-5-4320-300-14

4-48. TAILLIGHT STOPLIGHTS AND BLACKOUT SPOTLIGHT

Section VI. PREPARATION FOR STORAGE OR SHIPMENT - TM-5-4320-300-14_292

TM-5-4320-300-14 Pump Centrifugal Self-Priming Gasoline Engine Driven; 6-Inch 1500 GPM Capacity At 60 Foot Head Manual
Page Navigation
284

TM 5-4320-300-14 4-48. TAILLIGHT STOPLIGHTS AND BLACKOUT STOPLIGHT (CONT) Location/Item Action Remarks 2. Connecting Tag and disconnect connecting wires from wires trailer wiring harness at contacts. Remove stop light. INSPECT/REPAIR 3. Taillight Inspect for rust, dents, or other exterior damage. stoplights Replace if necessary. and blackout stoplight 4. Connecting Inspect for breaks or deteriorated insulation. wires Replace if necessary. 5. Bulbs Inspect for broken filaments, corroded bases, broken or discolored envelopes. Replace damaged bulbs. 6. Lenses Inspect for cracks or brittleness. Replace if necessary. INSTALLATION 7. Taillights Position lights on outside of frame assembly and blackout and install mounting bolts, lockwashers, and stoplight bracket (stoplight only) from inside of frame assembly. Install bulbs. Mount lens on lights and install mounting screws. 8. Connecting Reconnect at contacts. wires 4-188

Privacy Statement
Press Release
Contact