BATTERY BOX AND COVER ASSEMBLY, BATTERY, AND CABLES (CONT)

4-19. BATTERY BOX AND COVER ASSEMBLY, BATTERY, AND CABLES

BATTERY BOX AND COVER ASSEMBLY, BATTERY, AND CABLES (CONT) - TM-5-4320-300-14_202

TM-5-4320-300-14 Pump Centrifugal Self-Priming Gasoline Engine Driven; 6-Inch 1500 GPM Capacity At 60 Foot Head Manual
Page Navigation
194

TM 5-4320-300-14 4-19. BATTERY BOX AND COVER ASSEMBLY, BATTERY, AND CABLES (CONT) Remarks 3. Battery box Remove and set aside. Cover still chained to box. CAUTION Avoid making contact across the two battery posts. This can result in severe arcing. Disconnect battery cable from negative battery post before disconnecting any other leads from engine components. This precaution will prevent short circuits which could damage the alternator, voltage regulator, or other electrical components. When removing battery cable, use battery terminal puller to remove loosened terminals. Forcing battery terminals off without using puller may damage the battery posts. Never disconnect battery while alternator is operating. Never attempt to polarize the alternator. 4. Battery Loosen bolt cables securing nega- tive battery terminal to post and re- move termi- nal from post using a battery terminal puller. Using same method, remove posi- tive battery terminal from post. 4-98

Privacy Statement
Press Release
Contact