INSTALLATION/REPLACEMENT - TM-5-4320-300-14

TM-5-4320-300-14 Pump Centrifugal Self-Priming Gasoline Engine Driven; 6-Inch 1500 GPM Capacity At 60 Foot Head Manual
Page Navigation
199

TM 5-4320-300-14 4-20. ALTERNATOR ASSEMBLY (CONT) Location/Item Action Remarks 4. Alternator Support alternator and remove upper and Notify direct lower alternator adjustment bolts, nuts, and support main- washers. Remove alternator and set hardware tenance. aside. If replacement alternator is supplied with mounting hardware; discard old hard- ware. Remove bracket from alternator and set hardware aside. INSTALLATION/REPLACEMENT 5. Alternator Install onto replacement alternator and bracket tighten securely. 6. Alternator Support alternator and install upper and lower mounting bolts, nuts, and washers. Tighten hand tight. Swing alternator up- ward and install drive belts. 7. Drive belts Pull alternator away from engine just enough to permit belt adjustment, then tighten upper and lower alternator adjustment bolts securely. 8. Drive belt Depress each belt in turn midpoint between tension pulleys. Belts should deflect 1/2-3/4 inch (12.7-19 mm). If belt tension is incorrect, loosen adjustment belts slightly and pull alternator away from engine to tighten belts, or push it toward engine slightly to loosen. Retighten bolts. 9. Alternator Reconnect. connecting wires 4-103

Privacy Statement
Press Release
Contact