TM 5-4320-300-14
4-18. EXHAUST MANIFOLD PIPE (CONT)
Location/Item
Action
Remarks
3.
Gasket
Remove and discard.
INSPECTION
4.
Nuts
Inspect for damaged threads. Discard if not
usable.
5.
Studs
Inspect for damaged threads. Replace damaged
studs. Inspect for looseness, Tighten securely.
6.
Exhaust mani-
Inspect for holes. Inspect for damage to gasket
fold pipe
mating surface. Replace if not usable.
REPLACEMENT
7.
Gasket
Place over studs onto exhaust manifold mating
surface.
8.
Exhaust mani-
Place over studs onto gasket.
fold pipe
9.
Washers
Place one on each stud.
10. Nuts
Place one on each stud. Tighten evenly in an
alternating pattern. Torque to 53-56 inch-
pounds (72-76 Nm).
NOTE
Install remaining exhaust system components and test as described in para-
graph 4-17.
4-96
