TM 5-4320-300-14
Table 4-2. Organizational Maintenance Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 2 .Check for dirty, corroded, or loose starter and battery connections.
Clean and tighten starter and battery connections if necessary.
Step 3. Check for wrong grade of lubricating oil.
If oil is wrong grade (dependent on temperature), remove oil pan drain plug and drain oil into
suitable pan. Replace drain plug, and refill crank- case with correct grade of engine oil.
Capacity is 12-1/2 quarts (11.83 liters) with oil filter change.
4-34
