TM 5-4320-275-13 & P
ENGINE (CONT)
LOCATION/ITEM
ACTION
REMARKS
9. Coupling guard
Position coupling guard (4) over coupling and
align holes with frame holes. Install 4 cap screws
(1), lockwashers (3), and nuts (2). Use Loctite
on threads. Hold nuts (2) with 7/16 inch wrench
and tighten cap screws (1) with 7/16 inch socket
and handle.
10. Engine guard
Slide engine guard (2) toward engine. Position
engine guard so it is clear of engine starting
pulley. Tighten cap screws (1).
11. Torque cap
Tighten 4 cap screws (1) to 4 ft lb (5 Nm).
screws
12. Fuel filter
Turn shutoff valve out to ON.
4-29