TM 5-4320-274-14&P
(4) Position cover plate on pump body and se- cure with the cover plate shoulder bolts.
4-14. Electric Motor Assembly
a. Removal
(1) Remove the centrifugal pump (para 4- 13b).
(2) Remove the power cable shown in figure 4- 1.
(3) Refer to figure 4-4 and remove the four nuts and cap screws securing the motor to the frame.
b. Installation.
(1) Position the motor on the frame and se- cure with four cap screws and nuts.
(2) Install the power cable shown in figure 4-1.
(3) Install the centrifugal pump per instructions in paragraph 4-13c.
Figure 4-4. Electric motor assembly, removal and installation.
4-10