TM 5-3825-270-23&P
0128
REMOVAL - Continued
29.
Remove locknut (Figure 10, Item 42), upper snubbing washer (Figure 10, Item 39), upper isolator mount (Figure
10, Item 45), screw (Figure 10, Item 40), and washer (Figure 10, Item 41) from front engine mount bracket
(Figure 10, Item 43) and frame (Figure 10, Item 44). Discard locknut.
40, 41
42
39
45
43
44
Figure 10. Engine Module Removal.
30.
Repeat Step (29) for other side.
NOTE
Both rear engine mount bracket bushings are removed the same way. Right side shown.
31.
Remove locknut (Figure 11, Item 47), upper snubbing washer (Figure 11, Item 46), upper isolator mount (Figure
11, Item 51), screw (Figure 11, Item 48), and washer (Figure 11, Item 49) from rear engine mount bracket
(Figure 11, Item 50) and frame (Figure 11, Item 44). Discard locknut.
46
47
48, 49
44
50
51
Figure 11. Engine Module Removal.
32.
Repeat Step (31) for left side.
33.
Remove ten screws (Figure 12 Item 53) and washers (Figure 12, Item 54) from water pump assembly (Figure
12, Item 52) and flywheel housing (Figure 12, Item 55).