TM 5-3825-270-23&P
FIELD MAINTENANCE
ENGINE OIL FILTER REPLACEMENT
INITIAL SETUP:
References
Tools and Special Tools
Parts Manual (WP 0220) Figure 4044
Tool Kit, General Mechanic's: Automotive
(WP 0225, Table 1, Item 12)
Pan, Drain, 5 Gal Cap (WP 0225, Table 1, Item 2)
Equipment Condition
Wrench, Universal Chain (WP 0225, Table 1, Item
Engine OFF. (TM 5-3825-270-10)
2)
Oil drained. (WP 0124)
Gloves, Rubber (WP 0225, Table 1, Item 2)
Materials/Parts
Oil, Lubricating, Engine, OE/HDO 15W40
(WP 0224, Table 1, Item 42, 43, 44, 45)
Rag, Wiping (WP 0224, Table 1, Item 54)
REMOVAL
WARNING
Engine components become hot during normal operation. Allow engine to cool completely
prior to performing this task. If necessary, use insulated pads and gloves. Failure to comply
may result in injury or death to personnel.
WARNING
Prolonged contact with lubricating oil may cause skin rash. Immediately wash skin and
clothing thoroughly and remove saturated clothing that comes in contact with lubricating oil.
Keep area well-ventilated to keep fumes at a minimum. Failure to comply may result in injury
or death to personnel.
NOTE
Position drain pan under oil filter prior to removal.
Refer to local policies and regulations for disposal of contaminated oil, rags, and oil filter.
Universal chain wrench may be necessary for removing oil filter.
1.
Using universal chain wrench, remove oil filter (Figure 1, Item 2) from oil cooler assembly (Figure 1, Item 1)
by turning counter-clockwise.
0123-1