TM 5-3825-270-23&P
0105
INSTALLATION - Continued
Perform Steps (6) through (8) for main control panel right water sprinkler switch.
6.
Install two white wires (Figure 6, Item 19) on main control panel water sprinkler switch (Figure 6, Item 15) and
tighten screw (Figure 6, Item 18).
7.
Install blue wire with red stripe (Figure 6, Item 17) on main control panel water sprinkler switch (Figure 6, Item
15) and tighten screw (Figure 6, Item 16).
8.
Install purple wire (Figure 6, Item 8) on main control panel water sprinkler switch (Figure 6, Item 15) and tighten
screw (Figure 6, Item 7).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
9.
Apply sealant to the threads of six screws (Figure 7, Item 3).
5
6
3, 4
Figure 7. Main Control Panel Water Sprinkler Switch Installation.
10.
Install six washers (Figure 7, Item 4) and screws (Figure 7, Item 3) on main control box (Figure 7, Item 5) and
control panel (Figure 7, Item 6). Tighten six screws securely.
11.
Close control panel cover (Figure 8, Item 1) and secure with rubber t-handle (Figure 8, Item 2).