TM 5-3825-270-23&P
0044
WHITE WIRE
BLUE/RED WIRE
RIGHT
VIOLET
WATER
WIRE
TERMINAL 1
SPINKLER
SWITCH
TERMINAL 2
BACK OF
TERMINAL 3
WATER SPRINKLER
SWITCH
Figure 7. Right Water Sprinkler Switch - Step 4.
6.
Connect black multimeter probe to terminal 1 on RIGHT WATER SPRINKLERS switch
7.
While holding multimeter probes to terminals, move RIGHT WATER SPRINKLERS switch to ON position.
8.
Note multimeter reading.
CONDITION/INDICATION
Are less than 200 ohms measured across RIGHT WATER SPRINKLERS switch terminals with switch in ON
position?
DECISION
No - Replace RIGHT WATER SPRINKLERS switch. (WP 0105) Verify problem is solved. (Step 7 - Does RIGHT
WATER SPRINKLERS switch operate?)
Yes - Go to step 5. (Step 5 - Are 22 to 28 VDC present on blue/red wire at interconnect terminal strip, terminal
15?)
STEP 5
Are 22 to 28 VDC present on blue/red wire at interconnect terminal strip, terminal 15?
1.
Connect batteries. (WP 0085)
2.
Rotate EMERGENCY STOP switch to on position. (TM 5-3825-270-10)
WARNING
Remove all jewelry such as rings, ID tags, bracelets, etc., prior to working on or around
vehicle. Jewelry and tools can catch on equipment, contact positive electrical circuits, and
cause a direct short, severe burns, or electrical shock. Failure to comply may result in injury
or death to personnel.
3.
Move RIGHT WATER SPRINKLERS switch to ON position.
