TM 5-3825-270-23&P
0041
CONDITION/INDICATION
Are less than 200 ohms measured from red/green wire on engine speed RPM switch to interconnect terminal
strip terminal 5?
DECISION
No - Repair or replace red/green wire between engine speed RPM switch and interconnect terminal strip,
terminal 5. (WP 0099) Verify problem is solved. (Step 7 - Does engine speed RPM switch operate?)
Yes - Repair or replace white wire from interconnect terminal strip, terminal 5 to governor controller harness
connector, pin C1. (WP 0099) Verify problem is solved. (Step 7 - Does engine speed RPM switch operate?)
STEP 7
Does engine speed RPM switch operate?
1.
Start engine. (TM 5-3825-270-10)
2.
Increase and decrease engine speed using engine speed RPM switch. (TM 5-3825-270-10)
CONDITION/INDICATION
Does engine speed RPM switch operate?
DECISION
No - If the problem still exists, it is possible that another fault exists or that another troubleshooting procedure
applies. If this was the first time through the task, restart the same symptom troubleshooting fault task.
Yes - Your original problem has been resolved.
END OF WORK PACKAGE
0041-8
