TM 5-3825-270-23&P
FIELD MAINTENANCE
GENERAL INFORMATION
SCOPE
TYPE OF MANUAL
This manual contains operation and operator maintenance instructions for the Engineer Mission Module - Water
Distributor (EMM - WD).
EQUIPMENT NAME AND MODEL NUMBER
Engineer Mission Module - Water Distributor (EMM - WD), NSN 3825-01-577-2713, the module is manufactured by
E.D. Etnyre and Co.
PURPOSE OF EQUIPMENT
The EMM - WD's primary mission is to enhance the engineer corps and supported forces in the areas of combat
support, combat service support and general construction; this includes the construction of airfields, railways, roads
and infrastructure. When mounted on a truck or trailer the Engineer Mission Module - Water Distributor (EMM - WD)
shall provide a means of:
Spreading measured amounts of water for increasing soil moisture
Applying soil stabilization additives
Applying dust control chemicals
Firefighting support capability
MAINTENANCE FORMS AND RECORDS
Department of the Army forms and procedures used for equipment maintenance will be those prescribed by DA
PAM 750-8, The Army Maintenance Management System (TAMMS) Users Manual (WP 0221).
REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR)
If your Engineer Mission Module - Water Distributor (EEM-WD) needs improvement, let us know. Send us an EIR.
You, the user, are the only one who can tell us what you don't like about your equipment. Let us know why you don't
like the design or performance. If you have internet access, the easiest and fastest way to report problem or
suggestions is to go to https://aeps.ria.army.mil/aepspublic.cfm (scroll down and choose the "Submit Quality
Deficiency Report" bar). The Internet form lets you choose to submit an Equipment Improvement Recommendation
(EIR), a Product Quality Deficiency Report (PQDR) or a Warranty Claim Action (WCA). You may also submit your
information using an SF 368 (Product Quality Deficiency Report) (WP 0221) . You can send your SF 368 via e-mail,
regular mail, or facsimile using the addresses/facsimile numbers specified in DA PAM 750-8, The Army Maintenance
Management System (TAMMS) Users Manual (WP 0221). We will send you a reply.
CORROSION PREVENTION AND CONTROL (CPC)
Corrosion Prevention and Control (CPC) of Army materiel is a continuing concern. It is important that any corrosion
problems with the Engineer Mission Module - Water Distributor (EMM - WD) be reported so that the problem can be
corrected and improvements can be made to prevent the problem in the future. While corrosion is typically associated
with rusting of metals, corrosion can also include deterioration of other materials, such as rubber and plastic. Unusual
cracking, softening, swelling, or breaking of these materials may be a corrosion problem. If a corrosion problem is
identified, it can be reported using a SF 368 (Product Quality Deficiency Report) (WP 0221) which should be
submitted to the address specified in DA PAM 750-8, The Army Maintenance Management System (TAMMS) Users
Manual (WP 0221)
0001-1
