TM 5-3825-270-10
OPERATOR MAINTENANCE
FULLY DRAIN SYSTEM FOR COLD WEATHER
INITIAL SETUP:
Not Applicable
FULLY DRAIN SYSTEM FOR COLD WEATHER
NOTE
Ensure that all valves and petcocks are in the closed position prior to performing this task.
1.
Load water distributor on PLS truck (WP 0007).
2.
Hookup Universal Power Interface Kit (UPIK) (WP 0012).
WARNING
DO NOT stand in the path of the water when draining water from the water distributor. Injury
to personnel could result from the force of the water being discharged from water distributor.
3.
Remove connection point C1 cover (Figure 1, Item 1) from strainer inlet (Figure 1, Item 2).
1
2
4
3
Figure 1. Fully Drain System For Cold Weather.
4.
Remove connection point C3 cover (Figure 1, Item 3) from LH tank sump (Figure 1, Item 4).
5.
Remove connection point C2 cover (Figure 2, Item 5) from RH tank sump (Figure 2, Item 6).