TM 5-3820-276-10-2
0201
Table 3.
PMCS - PAC - After Road and Towing Operation.
ITEM TO BE
EQUIPMENT
ITEM
CHECKED OR
NOT READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
1
After
Left-Side Wheels 1. Check tires (Figure 12, Item 1) for cuts, gouges, and Tire cut, gouged, or
and Tires
uneven wear. Replace wheel and tire assembly as
shows uneven wear.
required (WP 0207).
1
2
3
4
5
6
WWDS00430
Figure 12. Left-Side Wheels and Tires.
2. Check tires for proper inflation of 125 psi (862 kPa).
Tire under or over
Inflate tire as required (WP 0205).
inflated.
3. Check for loose, damaged, or missing lug nuts
Loose, damaged, or
(Figure 12, Item 2). Torque loose lug nuts (WP 0207).
missing lug nuts. Notify
maintenance.
4. Check wheel valves (Figure 12, Item 4) for damage.
Wheel valve damaged.
Replace wheel and tire assembly (WP 0207).
5. Check wheel lugs (Figure 12, Item 3) for damage.
Wheel lugs damaged.
Notify maintenance.
6. Check wheel (Figure 12, Item 5) for damage.
Wheel damaged.
Replace wheel and tire assembly (WP 0207).
7. Check wheel hub cap (Figure 12, Item 6) for leaks or Wheel hub cap leaking or
cracks.
cracked. Notify
maintenance.
8. Remove fill plug from wheel hub cap (Figure 12,
Wheel hub oil level low.
Item 6) and check for proper oil level. Oil level should
Notify maintenance.
be level with bottom of opening.
2
After
Right-Side
1. Check tires (Figure 13, Item 1) for cuts, gouges, and Tire cut, gouged, or
Wheels and
uneven wear. Replace wheel and tire assembly as
shows uneven wear.
Tires
required (WP 0207).