• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
ENGINE CRANKS BUT DOES NOT START - WATER WELL SUPPORT VEHICLE (WWSV)
Figure 3. Fuel System Primer Switch.

Technical Manual For Water Well Drilling System (Wwds) - 2 Page Navigation
  87    88    89    90    91  92  93    94    95    96    97  
img
.
TM 5-3820-276-10-2
0115
ENGINE CRANKS BUT DOES NOT START - WWSV - Continued
CORRECTIVE ACTION - Continued
2.
Verify if Low Fuel Telltale and/or fuel gauge indicates low fuel (Figure 2).
LOW
FUEL
TELLTALE
FUEL
GAUGE
WWDS00593
Figure 2.
Low Fuel Telltale and Fuel Gauge.
3.
Position ignition switch to Off position (Figure 2).
a.
If Low Fuel Telltale is illuminated and fuel gauge reads low, fill fuel tank to appropriate
level with clean fuel (Volume 1, WP 0014). Verify if engine starts (Volume 1, WP 0012). If
fuel tank was run empty, and problem persists, proceed to next MALFUNCTION - Fuel
system requires priming.
b.
If fuel gauge does not read low, proceed to MALFUNCTION - Fuel level in fuel tank low.
MALFUNCTION
Fuel system requires priming.
CORRECTIVE ACTION
CAUTION
Do not operate fuel system primer switch for longer than 30 seconds without
allowing for cooling time. Failure to comply may result in damage to equipment.
1.
Push and hold fuel system primer switch for 10 to 30 seconds (Figure 3).
0115-2
02/13/2013root(tswp)wpno(T20002)


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.