TM 5-3820-276-10-1
0017
SETUP AND CAB CONTROLS SETUP - Continued
1
2
6
5
4
3
WWDS00226
Figure 2.
Cab Setup.
3.
Depress clutch pedal (Figure 2, Item 6).
4.
Ensure brake system air pressure gauge (Figure 2, Item 5) indicates air pressure above 100 psi (689 kPa).
NOTE
Air pressure must be above 100 psi (689 kPa) before changing mode of operation.
5.
Set RIG MODE/ROAD MODE switch (Figure 2, Item 1) to RIG MODE position.
6.
Set hi/low range control lever (Figure 2, Item 3) to up (high) position.
7.
Using gear shift lever (Figure 2, Item 2), place transmission into 9th gear.
8.
Slowly release clutch pedal (Figure 2, Item 6).
END OF TASK