TM 5-3820-276-10-1
0013
ELECTRIC BRAKE CONTROLLER OPERATION - Continued
NOTE
When the manual control is pushed to the left, the control begins to apply the trailer brakes.
The further to the left it is pushed the harder the brakes are applied until the maximum set
by the output control is reached.
5.
In an open area, drive forward and apply the trailer brakes using the manual control (Figure 11, Item 4).
a.
If the trailer brakes are weak adjust the output control (Figure 11, Item 2) up.
b.
If the trailer brakes jerk or lockup adjust the output control (Figure 11, Item 2) down.
6.
In an open area, drive forward and press the brake pedal, the tow vehicle and trailer should make a smooth
stop.
a.
If the stop seems slow and more aggressive braking is required, move the SYNC control
(Figure 11, Item 1) forward while holding the brake pedal.
b.
If the stop seems too aggressive adjust the SYNC control (Figure 11, Item 1) backwards while holding
the brake pedal.
END OF TASK
END OF WORK PACKAGE
0013-16
02/13/2013root(opusualwp)wpno(O00004)
