TM 10-5430-245-13&P
UNIT MAINTENANCE
DRUM, FABRIC, COLLAPSIBLE, DRINKING WATER,
500 GALLON CAPACITY
REMOVE/INSPECT/CLEAN/INSTALL
SHACKLE, BEARING AND SWIVEL PLATES, WIRE ROPE, DRUM BODY
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool Kit, General Mechanic's (WP 0028, Item 1)
Cotter Pin (WP 0032, Item 1)
Torque Wrench (WP 0028, Item 2)
Detergent, Gen. Purpose (WP 0031, Item 4)
Screwdriver Attachment, Socket (WP 0028, Item 3)
Cloth, Abrasive (WP 0031, Item 3)
Chalk (WP 0031, Item 2)
Brush, Scrub (WP 0031, Item 1)
References:
Equipment Condition:
Coupler valve and adapter assembly removed
Personnel:
Two
REMOVAL
1.
Remove cotter pin (Figure 1, Item 1) from screw pin (Figure 1, Item 2). Discard cotter pin.
2.
Remove screw pin (Figure 1, Item 2) from shackle (Figure 1, Item 3). Shackle will come loose from swivel plate lug
4
2
3
1
CAUTION
A chalk mark should be placed across both ends of the drum to
aid in assembling drum parts and to ensure proper alignment
during reassembly. Failure to comply may cause leakage.
3. Place a chalk mark across each end of the drum (Figure 2).
