TM 10-4930-236-13&P
(7) Pull either or both tank valve control levers to the “ON” position.
WARNING
An overheated pump creates a potential fire hazard and will
cause pump damage. Do not- allow pump to run longer than one
minute with nozzles closed. Do not run pump with tank valves
closed.
(8) Insert dispensing nozzle into tank being fueled and squeeze the nozzle lever.
(9) Move ON-OFF-Switch to ”ON” position.
(10)
When tank is-full, release nozzle lever.
(11)
Move ON-OFF switch to OFF position and store cable on truck.
(12)
Remove dispensing nozzle from tank, disconnect nozzle ground clamp or plug and rewind hose onto
hose reel.
(13)
Dipole tank valve control levers to “OFF” position.
(14)
Lead safety equipment and disconnect static ground as per paragraph 2-3.
2-16
