TM 10-4630-207-13&P
0045 00
4. Master Cylinder
a. Position left hand cylinder bracket (figure 20, item 1) against master cylinder (figure 20, item
2).
b. Position right hand cylinder bracket (figure 20, item 3) against master cylinder (figure 20,
item 2).
c.
Fasten left and right hand cylinder brackets to the master cylinder with bolts (figure 20, item
d. Slide master cylinder with right and left hand brackets into the outer case (figure 20, item 7).
e. Secure the master cylinder assembly with the four bolts (figure 20, item 8) and lockwashers
(figure 20, item 9).
f.
Screw the cap (figure 20, item 10) onto the master cylinder.
g. Install o-ring (figure 20, item 12) and orifice connector (figure 20, item 13) to master cylinder.
h. Connect brake hose (figure 21, item 1) to orifice connector (figure 21, item 2).
i.
Install master cylinder hose bracket (figure 21, item 3) with mounting bolts (figure 21, item 4)
and lockwashers (figure 21, item 5).
j.
Fasten hard line fitting (figure 21, item 6) to the brake hose (figure 21, item 7).
k.
Install cylinder cover (figure 20, item 11). Bleed brake system lines in accordance with brake
fluid filling and bleeding procedures within this Work Package.
0045 00-18
