TM 10-4630-207-13&P
0025 00
1
6
4
2
5
3
Figure 4. Replacing Hydraulic Pump
9. Re-connect hoses to the T fittings (figure 5, item 1).
10. Do not connect hoses to piston valves at this time. Refill and bleed hydraulic system as follows.
11. Place the pump lever (figure 5, item 2) diagonally away from the handle and slowly operate the pump
handle (figure 5, item 3).
1
3
2
Figure 5. Re-connecting Hoses
12. When hydraulic fluid appears at the end of the hoses (figure 6, item 1), stop pumping and connect the
hoses to the piston valve fittings (figure 6, item 2). Wipe up any fluid that may have spilled.
0025 00-4
