TM 10-4630-207-13&P
0026 00
WARNING
Allow the engine to cool for approximately 30 minutes before adding oil. The
engine is hot and presents a burn hazard. Coming in contact with hot engine
parts may cause severe injury.
a. Wipe clean around the oil filler cap (figure 1, item 1) taking care so that no foreign particles enter.
b. Remove the filler cap (figure 1, item 1).
c.
Add new engine oil through the oil filler port (figure 1, item 2).
d. Wait approximately fifteen minutes until the oil reaches the pan. Check oil level with dipstick
(figure 2, item 1) for proper oil level as marked.
e. Reinstall the oil filler cap (figure 1, item 1).
1
2
Figure 1. Oil Filler Cap with Port
0026 00-2
