TM 10-4630-207-13&P
UNIT MAINTENANCE
WASTE WATER VACUUM TANK TRAILER
NSN 4630-01-513-8155
SERVICE UPON RECEIPT
INITIAL SETUP:
Tools
Personnel Required
Flashlight, General Mechanics Tool Kit (WP 0053
77W Water Treatment Specialist
63B Light Vehicle Mechanic
Materials/Parts
Equipment Condition
Rags, Wiping (WP 0091 00, Item 28)
Engine shut off
Ignition key removed
Emergency stop button pushed in
Wheel chocked
Emergency brake set
GENERAL
Upon receipt, retrieve keys by removing the tape from the vacuum pump hose towards the front of the
vehicle. Inspect the WWET/T for damage sustained during shipment and presence of Components of End
Item (COEI) and Basic Issue Items (BII) identified in WP 0089 00. Document any shortages on SF Form
364, Report of Discrepancy. Open the tool box and inventory the contents of the over pack for presence of
the following items:
Item
Quantity
Vacuum pump drive belt
1
Cam-groove gasket 2 "
2
Cam-groove gasket 4"
2
Engine fuel filters
2 (1 of each type)
Engine oil filter
2
Engine air filter
2
Primary shutoff seat
1
Secondary shutoff (Moisture Trap) seat
1
Engine glow plug
2
Float level packing (Teflon)
36"
Fusible frangible link
2
Running light bulb
2
Tail light bulb
2
Engine fan belt
1
Bottle jack (12 ton)
1
SERVICE UPON RECEIPT OF MATERIAL
CAUTION
The WWET/T is equipped with inertia activated, hydraulically operated brakes. A
horseshoe lockout device must be installed to prevent damage to the brakes due to
lock up when the prime mover (and trailer) are being backed up. The lockout device
must be removed prior to resuming forward motion.
1. Familiarize operator with operation of brakes (figure 1, item 1), lockout device (figure 2, item 2) and
other operating controls and indicators as described in WP 0004 00 and WP 0005 00.
0009 00-1
