TM 10-4630-207-13&P
0009 00
2
1
Figure 5. Battery and Cables
8. Upon initial startup, apply vacuum seal to rear manway (figure 6, item 1) and primary shutoff cover
(figure 6, item 2) by tightening cover access screws (figure 6, item 3) while the tank is empty and
vacuum is applied.
3
1
2
3
Figure 6. Manway and Primary Shutoff Cover
PRELIMINARY SERVICING OF EQUIPMENT
Perform operator PMCS as described in WP 0011 00.
END OF WORK PACKAGE
0009 00-4
