TM 10-4320-344-24
Do not use cleaning solvent without proper ventilation and clothing.
Do not
smoke or use near open flame or excessive heat.
Dry cleaning solvent is
potentially dangerous to personnel and property.
Clean parts in a well-
ventilated area.
Avoid inhalation of solvent fumes.
Wear goggles and rubber
gloves to protect eyes and skin.
Wash exposed skin thoroughly.
Failure to
obey this warning may result in personal injury or death.
f .
Pour solvent into intake manifold openings in cylinder head (6).
I f s o l v e nt
seeps around any intake valve (11),
remove intake valve (11) and regrind.
g.
Turn cylinder head (6) on the intake manifold side.
Do not use cleaning solvent without proper ventilation and clothing.
Do not
smoke or use near open flame or excessive heat.
Dry cleaning solvent is
potentially dangerous to personnel and property.
Clean parts in a well-
ventilated area.
Avoid inhalation of solvent fumes.
Wear goggles and rubber
gloves to protect eyes and skin.
Wash exposed skin thoroughly.
Failure to
obey this warning may result in personal injury or death.
h.
Pour solvent in exhaust manifold openings of cylinder head (6).
If solvent
seeps around any exhaust valve (15), remove exhaust valve (15) and regrind.
i .
Position new gasket (5) and water outlet cover (4) against cylinder head (6)
and secure with four new lock washers (2) and bolts (1).
Tighten bolts (1).
j .
Install pipe plug (3) in water outlet cover (4).
Tighten pipe plug (3).
4-7
