TM 10-4320-344-24
3.6.11 Pump Support Maintenance, Model US636HCCD-1.
This task covers:
3.6.11.1 Removal
3 .
6 .1 1 . 3 I n s t a l l a t i on
3 .
6 .1 1 . 2 R e p a ir
INITIAL SETUP
Tools
General Mechanic’s Automotive
Tool Kit, Appendix B, Section III,
Item 1
Materials/Parts
Lock Washers (TM 10-4320-344-24P)
Equipment Conditions
Pumping station shut down, TM 10-4320-
344-10.
Equipment Conditions (Continued)
Pumping Assembly removed, paragraph 3.6.1.
General Safety Instructions
Do not work on equipment that is not
securely stabilized to prevent rolling
o r s l i d i n g.
Do not work on equipment without follow-
ing standard shop safety practices.
3.6.11.1 Removal.
Remove four nuts (Figure 3-14, 1), lock washers (2), flat washers
(3), mounting bolts (4), and two pump supports (5) from trailer chassis (6).
Discard lock washers (2).
Figure 3-14. Pump Support Maintenance, Model US636HCCD-1.
3.6.11.2 Repair.
a.
Inspect all
b .
Replace all
components and mounting hardware for damage.
defective components.
3-34
