TM 10-4320-344-24
2.21.43.2 Installation.
Do not use cleaning solvent without proper ventilation and clothing.
Do not
smoke or use near open flame or excessive heat.
Dry cleaning solvent is
potentially dangerous to personnel and property.
Clean parts in a well-
ventilated area.
Avoid inhalation of solvent fumes.
Wear goggles and rubber
gloves to protect eyes and skin.
Wash exposed skin thoroughly.
Failure to
obey this warning may result in personal injury or death.
a .
Clean gasket mounting surface of engine with rag dampened in cleaning solvent.
b .
Ensure gasket mounting surface of
engine is dry and position new gasket (4)
and water pump assembly (3) against cylinder head assembly and secure with
three new lock washers (2) and screws (1).
Torque screws (1) to 24 ft-lbs
(33 N•m).
2-357
