TM 10-4320-344-24
2.21.43 Water Pump Assembly Maintenance, Model 609-A.
This task covers:
2.21.43.1 Removal
2 .
2
1 .4 3 . 3 I n s t a l l a t i o n
INITIAL SETUP
Tools
Equipment Conditions
General Mechanics Automotive
Pumping station shut down, TM 10-4320-
Tool Kit, Appendix B, Section
344-10.
III, Item 1
Bypass Hose and Water Intake Hose
Goggles, Appendix B, Section III,
removed, paragraph 2.19.2.
Item 2
Torque Wrench,
III, Item 2
Material/Parts
Alternator Belt removed, paragraph
Appendix B, Section
2.20.23.
Fan removed, paragraph 2.20.56.
General Safety Instructions
Gloves,
Appendix C, Item 11
Do not work on equipment that is not
Rags, Appendix C, Item 20
securely stabilized to prevent rolling
Solvent, Dry Cleaning, Appendix C,
o r s l i d i n g.
Item 26
Gasket (TM 10-4320-344-24P)
Do not work on equipment without follow-
Lock Washers (TM 10-4320-344-24P)
ing standard shop safety practices.
2.21.43.1 Removal.
Remove three screws (Figure 2-158,
1), lock washers (2), Water
pump assembly (3), and gasket (4) from engine.
Discard lock washers (2) and
gasket (4).
Figure 2-158. Water Pump Assembly Maintenance, Model 609-A.
2-356
