TM 10-4320-344-24
Diesel fuel is flammable. Keep sparks, cigarettes, and open flames away from
fuel system components while working on engine.
Ensure container is used to catch fuel and fuel is disposed of properly.
Do not work on equipment with battery connected. Electrocution hazard is
present when battery is connected.
Failure to obey these warnings may result in personal injury or death.
When removing fuel solenoid, cap or plug fuel lines and fuel injection pump
assembly to prevent foreign particles from entering the engine fuel system.
Failure to cap or plug openings may result in damage to the equipment.
a .
Disconnect wiring harness (Figure 2-114, 1) from receptacle connector (2).
b.
Remove receptacle connector (2) from fuel solenoid (3).
c .
Remove banjo bolt (4), two flat washers (5), and fuel solenoid (3) from fuel
injection pump assembly (6).
2.21.3.2 Installation.
a .
Position fuel solenoid (3) and two flat washers (5) on fuel injection pump
assembly (6) and secure banjo bolt (4).
b .
Install receptacle connector (2) on fuel solenoid (3).
c .
Connect wiring harness (1) to receptacle connector (2).
2-267
