2.21.2.2 Repair.
a .
Clean all fittings and lines (exterior) with clean cloth.
To prevent the possibility of embedding foreign objects in the eyes, safety
goggles must be worn when using compressed air.
b.
Induce 25-35 psi (172.2-241.09 kPa) of air into lines to clear any foreign
matter.
c .
Inspect lines and fittings for damage.
d.
Replace all defective fittings and nonreparable line assemblies.
e .
Refer to Appendix D to repair damaged rubber hose assemblies on Models 609-C
and US636HCCD-1.
2.21.2.3 Assembly.
Wrap antiseize tape in direction of threads for all pipe fittings prior to
i n s t a l l a t i o n.
a .
Refer to table of applicable pumping assembly for location and type of
hardware.
b .
Refer to figure of applicable pumping assembly and assemble components as
required. Remove and discard tags.
2-265
TM 10-4320-344-24
NOTE
