TM 10-4320-344-24
a. Remove four nuts (Figure 2-94, 1), lock washers (2), flat washers (3), and
control panel (4). Discard lock washers (2).
b .
Remove four nuts (5), lock washers (6), flat washers (7), and sandwich mounts
(8) from control panel frame assembly (9). Discard lock washers (6).
2.16.36.2 Repair.
a .
Inspect control panel (4) for damage.
b .
Inspect for damaged or missing data plates on control panel (4). Refer to
paragraph 2.11.1 to replace damaged or missing data plate.
c .
Inspect all mounting hardware for damage.
d.
Replace all defective components.
2.16.36.3 Installation.
a.
Install four sandwich mounts (8) in control panel frame assembly (9) and
secure with four flat washers (7), new lock washers (6), and nuts (5).
b.
Install control panel (4) in control panel frame assembly (9) and secure with
four flat washers (3), new lock washers (2), and nuts (1).
2-227
