Figure 2-54. Control Panel Assembly Removal and Installation, Model 609-A.

Figure 2-53. Control Panel Assembly Disconnection, Model 609-A (Sheet 2 of 2)

TM-10-4320-344-24 Pump Assembly Water 600 GPM Model 609-A (NSN 4320-01-184-7494) Model 609-C (NSN 4320-01-261-6470) Model US636HCCD-1 Manual
Page Navigation
156

j . k. l . m. n. o . p. q . TM 10-4320-344-24 Tag and disconnect engine lubrication oil pressure gauge hose assembly (34). Loosen screw (35, sheet 2) and remove universal wire stop (36) from fuel rack c a b l e ( 3 7 ). Remove nut (38), screw (39), and cable clamp (40) from fuel rack cable (37). Remove electrical tiedown straps (18) around wiring harness (19) and fuel rack c a b l e ( 3 7 ). Remove electrical tiedown straps (18) securing sheathing (20), wiring harness (19) and engine coolant temperature gauge tube (41). Remove engine temperature gauge tube (41) from engine (42) and wiring harness (19). Remove two nuts (43, sheet 1), lock washers (44), conduit clamps (45), four flat washers (46), two bolts (47), and wiring harness (19) from control panel assembly frame (48). Discard lock washers (44). Tag and disconnect suction elbow hose assembly (49) from elbow on suction elbow. Figure 2-54. Control Panel Assembly Removal and Installation, Model 609-A. r. Remove two bolts (Figure 2-54, 1), lock washers (2), and flat washers (3) from front supports (4). s. Remove two bolts (5), lock washers (6), and flat washers (7) from rear supports (8). 2-145

Privacy Statement
Press Release
Contact