TM 10-4320-325-14
TO 34Y5-2-40-1
This task covers:
a) Removal
b) Service
c) Installation
INITIAL SETUP
Tools
Materials/Parts
Tool Kit, General Mechanics
Cloth, Lint-free (Item 6, Appendix E, Section II)
(Item 1, Appendix B, Section III)
Equipment Condition
None
1
3
9
5
8
4
3
2
6
7
A
B
REMOVAL: Refer to Figure 4-9.
a. Remove fuel cap (1) and drain plug (2), located at the bottom right corner of the fuel tank (3),
and drain out all fuel into a clean container.
b. Release hose clamps on injection nozzle (4) side of overflow hose (5).
c.
Release fuel line (6) hose clamp at injection pump (7).
d. Remove two hex head screws (8) that secure the upper part of the fuel tank stay bracket (9),
and remove stay bracket (9).
e. Remove fuel tank (3).
Change 4
