TM 10-4320-325-14
Table 3-1. Operator Troubleshooting Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
8.
UNEXPECTED REVERSE ROTATION
Step 1.
Check for excess oil.
Drain excess oil.
Step 2.
Slow recoil pull may cause reverse engine rotation.
Review starting procedures under prevailing conditions. Pull faster.
If starting procedure has been performed correctly but engine rotation is reversed,
notify Unit maintenance.
Section III. OPERATOR MAINTENANCE PROCEDURES
3-2.
INTRODUCTION.
Maintenance procedures at operator level of maintenance include as necessary: removal, inspection,
replacement, and installation of air cleaner assembly.
