TM 10-4320-325-14
TO 34Y5-2-40-1
STENCILS.
Refer to Figure 2-5.1.
3
4
1
2
5
(Hidden)
Figure 2-5.1. Stencils
The centrifugal pump has the following stencils:
a. Prime stencil (1). This stencil is located on top of the pump housing, near the priming port. It
identifies where pump can be primed during operation.
b. Four Soldier Lift stencil (2). This stencil is located on all four carrying handles and in two visible
places on the pump frame. It identifies all four lifting points used to transport the pump, and
emphasizes the importance of having four soldiers available to lift the pump.
c.
Out stencil (3). This stencil is located on top of the discharge port. It identifies the pump
discharge connection to the operator.
d. Diesel Fuel Only stencil (4). This stencil is located on the fuel tank. It provides the operator
with the type of fuel to be used.
e. Engine Oil Level/Fill stencil (5). This stencil is located on the oil fill tube and identifies the oil
level check/fill location.
Change 4
