TM 10-4320-325-14
TO 34Y5-2-40-1
Note
Make complete checks and services when equipment is shut down.
If the equipment must be kept in continuous operation, do only the
procedures that can be performed without disturbing operation.
Location
Item
Not Fully Mission
Interval
Procedure
No.
Capable If:
Item to
Check/Service
2
2
3
2
2
1
1
1
3
2
Note
Engine Oil Level/Fill stencils, located on
the oil fill tube (two locations on the
pump frame), are not shown.
1
Before
Data Plates
Visually check that data plates (1) and stencils
and Stencils
(2) are legible.
2
Before
Handles
Check condition of handles (3).
Handles are
inoperative.
Change 4
2-7/(2-8 blank)
