TM10-4320-315-24
4-5.
MAINTENANCE OF CYLINDER LINERS
This task covers:
a.
Remove
c.
Install
b.
Inspect
INITIAL SETUP:
Tools
Equipment Conditions
Ring Compressor
Cylinder head removed (para. 3-30).
(Item 3, Appendix B)
Inside and Outside Micrometer
(Item 3, Appendix B)
Materials/Parts
Shims (TM 10-4320-315-24P)
Oil, Lubricating
(Item 10, Appendix C)
a.
REMOVE. (Figure 4-6)
(1)
Set piston at Bottom Dead Center (BDC).
(2)
Rotate crankshaft until piston lift cylinder out of crankcase.
(3)
Slide cylinder off piston.
Figure 4-6. Cylinder Liner
4-9
